Mobile phone:
:
Phone:
Manager Zhang Qi
Dalian box-type basketball stand manufacturer’s simplest disassembly and assembly of basketball stand 1. Key points of installation and construction
, during installation Care should be taken to avoid injuring anyone.
. The installation sequence of the box frame is: box, column, probe arm, rear tie rod, backboard, basket, upper tie rod, lower tie rod, and counterweight.
When installing the tempered glass backboard, the five connection points must be on the same plane. Dalian box-type basketball stand manufacturer is the easiest to disassemble and assemble the basketball stand. The force on the five points must be uniform; the probe arm, blue plate, and blue circle Be in line. The probe arm and blue ring are strictly prohibited from contacting the glass blue plate.
After the composite fiberglass backboard is installed, the connection points must be sealed with glass glue to prevent rainwater from damaging the blueboard.
Dalian box-type basketball stand manufacturer's simplest disassembly and assembly of basketball stand 2. Installation data points
, arm length. For underground one-arm basketball stand, the distance between the two basketball stand pillars is. .
The vertical downward extension line of the basketball board is away from the inner edge of the baseline.
, Make a pit outward from the inner edge of the bottom line; the pit is deep, length*width.
The pillars of the basketball stand are away from the inner edge of the bottom line. Dalian box-type basketball stand manufacturer is the easiest to disassemble and assemble the basketball stand
. The upper edge of the basketball ring is off the ground.
Code:
Dalian box-type basketball stand manufacturer's simplest disassembly and assembly of basketball stands